Traffic routes

EUROLASTIC TC 30 G traffic is a very fast-curing, pourable 2-component polysulphide-based joint sealant that has been specially developed for the requirements of modern traffic routes in concrete construction.

Due to the very fast reaction time of EUROLASTIC TC 30 G traffic, it is preferably processed efficiently with our specially developed potting systems, such as the Jointmaster 650, with high potting performance.

The high weather, UV and temperature resistance ensures that the joint seal remains permanently elastic and impermeable to liquids – this extends the renovation intervals and significantly reduces lifecycle costs.

EUROLASTIC TC 20 G is an economical, pourable, elastic 2-component polysulphide-based joint sealant that can be applied by hand or using potting equipment.

EUROLASTIC TC 20 G guarantees secure movement absorption and a reliable sealing effect even in the event of severe temperature changes and dynamic load changes caused by traffic operations.

In addition, EUROLASTIC TC 20 G offers good chemical resistance, which is unavoidable in road use. The result is a durable, liquid-tight joint with high long-term performance – even under extreme environmental conditions

EUROLASTIC TC 15 G is a very fast-curing, self-levelling 2-component polysulphide-based cable joint sealant that has been specially developed for embedding cables, wires and pipes in concrete surfaces. Especially in traffic areas, the integration of technical

infrastructure such as sensor cables, power lines or empty conduits in combination with expansion joints. EUROLASTIC TC 15 G ensures stress-free, full-surface embedding and reliable sealing at the same time.

The chemical resistance ensures long-term protection.

The self-levelling properties ensure that the material adapts optimally to the course of the joint and the embedded components. EUROLASTIC TC 15 G is available in signal colors (e.g. red) to significantly increase the visibility of cables and pipes embedded in the roadway to prevent unintentional damage during maintenance work.

EUROTEK TK joint tape is a highly elastic polysulphide-based sealing system. It is ideal for sealing large joint widths, complex geometries, strong component movements or difficult bonding surfaces.

Thanks to its exceptional UV and weather resistance, the EUROTEK TK joint tape achieves a long-term durability of over 10 years. The high elasticity ensures reliable movement absorption even under extreme temperature and load changes.

The system is primarily used for waterproofing concrete sliding walls, but is also used in other non-traffic areas with high demands on durability, media resistance and flexibility. Thanks to its simple application – even with complex joints – it is an economical and durable solution for demanding structural waterproofing.

EUROREPAIR PC 96 is a fast-curing 2-component epoxy resin mortar for concrete repair of highly stressed traffic areas.

The formulation offers very good workability and enables the reprofiling of damage close to the surface through to deep damage that extends over the entire roadway cross-section.

The repair mortar has a high compressive and flexural tensile strength and is used in heavily stressed concrete surfaces where both chemical and mechanical resistance are required.

The system is available in three hardener speeds (slow, normal and fast) depending on the requirements, which means that processing can be optimally adapted to the respective construction site conditions.

EUROREPAIR PC 96 AS is a solvent-free, flexibilized 2-component epoxy resin mortar that has been specially developed for the repair of asphalt surfaces. Thanks to its flexibilization, the mortar adapts optimally to the movements of the asphalt and thus prevents cracking and spalling.

The material is highly filled, pigmented and impresses with its easy application, fast curing and higher mechanical strength than asphalt. Thanks to its excellent adhesion to load-bearing substrates, it ensures a durable, chemically resistant repair.

EURODUR EPH 0402 CRACKFIT is a 2-component crack filling compound on an epoxy resin hybrid basis with self-leveling properties.

The viscoplastic, flexibilized formulation combines high mechanical strength with chemical resistance.

EURODUR EPH 0402 CRACKFIT achieves very good adhesion to various substrates and is used for sealing cracks and small breakouts in concrete surfaces. Due to the flexibilization, the material cures with low stress.

EURODUR force fit is a thixotropic, solvent-free 2-component anchor adhesive based on vinyl ester resin for the highest loads in concrete and masonry. EURODUR force fit has European Technical Approval (ETA) for anchoring in cracked and non-cracked concrete. And a further European Technical Approval (ETA) for retrofitted reinforcement connections under seismic load.

Especially in road construction, where substructures, crash barriers, supporting structures or technical installations have to withstand extreme forces, EURODUR force fit offers a reliable solution. Thanks to its high load-bearing capacity, fast curing and resistance to water, fire and chemicals, it is ready for use even under the most difficult conditions.

The anchor adhesive can be used universally – from dry and wet concrete to flooded drill holes. Subsequent reinforcement connections in reinforced concrete can also be carried out safely and in accordance with standards. With special variants such as the Winter Edition (down to -20 °C) and the Tropical Edition (up to +50 °C), EURODUR force fit is suitable for almost any climate.