Flight operation areas

EUROLASTIC TC 30 G is a pourable, elastic 2-component joint sealant based on polysulphide, specially formulated for areas subject to the highest loads such as taxiways, aprons and parking areas, which are exposed to extreme stresses such as kerosene, de-icing agents, hydraulic oils and at the same time strong temperature changes.

With its very high chemical resistance, elasticity and liquid-tight properties, it ensures reliable operational safety even at temperatures from minus 50 °C to plus 120 °C.

The cold-vulcanizing properties of polysulphide make it possible to seamlessly integrate joint renovations or one-day sections into existing surfaces – without weak points in the bond between the old and newly applied polysulphide joint sealant. This means that repairs can be carried out quickly, safely, liquid-tight and sustainably.

Thanks to the high polysulphide polymer content of over 40 %, EUROLASTIC TC 30 G is extremely resistant to chemicals, UV radiation, weathering and ageing.

EUROLASTIC TC 30 G traffic is a very fast-curing, pourable 2-component polysulphide-based joint sealant that has been specially developed to meet the requirements of air traffic areas.

Due to the very fast reaction time of EUROLASTIC TC 30 G traffic, it is preferably processed efficiently with our specially developed potting systems, such as the Jointmaster 650, with high potting performance.

The high weather, UV and temperature resistance ensures that the joint seal remains permanently elastic and impermeable to liquids – this extends the refurbishment intervals and significantly reduces lifecycle costs.

EUROLASTIC TC 30 S is a stable, high-quality 2-component polysulphide-based joint sealant developed for joints subject to heavy loads. Its stable consistency enables precise application, even on vertical or inclined surfaces, and makes it the ideal solution wherever pourable systems cannot be used – for example on gutter joints or surfaces with steep slopes.

Like EUROLASTIC TC 30 G, EUROLASTIC TC 30 S also impresses with its very high chemical resistance to aviation fuels, oils, de-icing agents and other aggressive media. EUROLASTIC TC 30 S is also used as a high performance adhesive for the installation of polysulphide-based waterstops.

EUROLASTIC TC 30 S is therefore the perfect complement to TC 30 G and TC 20 G and ensures that a highly elastic, liquid-tight and reliable joint seal is achieved even under difficult installation conditions.

EUROLASTIC TC 20 G is an economical, pourable, elastic 2-component polysulphide-based joint sealant that can be applied by hand or using potting equipment.

EUROLASTIC TC 20 G guarantees secure movement absorption and a reliable sealing effect even in the event of severe temperature changes and dynamic load changes caused by traffic operations.

In addition, EUROLASTIC TC 20 G offers good chemical resistance to kerosene, hydraulic oils, de-icing agents, solvents and other aggressive media that are unavoidable in airport operations. The result is a durable, liquid-tight joint with high long-term performance – even under extreme environmental conditions.

EUROLASTIC TC 15 G is a very fast-curing, self-levelling 2-component polysulphide-based cable joint sealant that has been specially developed for embedding cables, lines and pipes in concrete surfaces. Especially at airports, the integration of technical infrastructure such as sensor cables, power lines or empty conduits in combination with expansion joints is indispensable. EUROLASTIC TC 15 G ensures stress-free, full-surface embedding and reliable sealing at the same time.

Chemical resistance to kerosene, hydraulic oils and other aggressive media ensures long-term protection.

The self-levelling properties ensure that the material adapts perfectly to the joint and the embedded components.

EUROLASTIC TC 15 G is available in signal colors (e.g. red) to significantly increase the visibility of cables and wires embedded in the roadway to prevent accidental damage during maintenance work.

EUROTEK TK Joint Tape WHG is a highly elastic, chemical-resistant, polysulphide-based sealing system for sealing expansion joints in LAU systems in accordance with WHG. It is ideal for sealing large joint widths, complex geometries, strong component movements or difficult bonding surfaces.

In combination with the specially matched EUROLASTIC TC 30 S grey adhesive system, a permanently elastic, liquid-tight joint seal is created that is approved by the building authorities.

It is laid in areas not subject to traffic to seal vertical and horizontal joints and to seal floor and wall connections.

D2 AIRFIELD PROTECT is an innovative coating system for the extreme requirements of civil and military aircraft. D2 AIRFIELD PROTECT combines high mechanical strength with chemical and thermal resistance in a coordinated overall system.

The duroplastic D2 AIRFIELD PROTECT rough surfacing significantly increases the grip of flight operation surfaces, considerably reduces the risk of aquaplaning and meets the strict requirements of BFR 9021 (construction guideline for military airfields) for safety-relevant surface properties.

By applying the dark pigmented, matt coating, the light reflection of light-colored concrete surfaces is eliminated and the camouflage effect is significantly improved. In addition, the dark coloring accelerates the defrosting process, which significantly reduces the use of de-icing agents during winter road maintenance.

EUROREPAIR PC 96 is a fast-curing 2-component epoxy resin mortar for concrete repair of highly stressed traffic areas.

The formulation offers very good workability and enables the reprofiling of damage close to the surface through to deep damage that extends over the entire cross-section of the pavement.

The repair mortar has a high compressive and flexural strength and is used in heavily stressed concrete surfaces where both chemical and mechanical resistance are required.

Depending on the requirements, the system is available in three hardener speeds (slow, normal and fast), which means that processing can be optimally adapted to the respective construction site conditions.

EUROREPAIR PC 96 is also available in a WHG-approved version, which is used at normal hardener speed and has been specially developed for applications in areas that fall under the requirements of the Water Resources Act.

EURODUR EPV 0411 GROUNDFIX is a fast-curing, pourable 2-component epoxy resin hybrid with high chemical and mechanical resistance. It adheres excellently to concrete and metal and is used for the installation of underfloor lamps in concrete ceilings.

EURODUR EPV 0411 GROUNDFIX is also used for the force-fit grouting of metal anchors, anchor and threaded bolts or dowels in crash barrier and bridge construction.

EURODUR EPV 0411 GROUNDFIX is available in different curing speeds and can therefore be flexibly adapted to the requirements of the construction site and the climatic conditions.

EURODUR EPH 0402 CRACKFIT is a 2-component crack filling compound on an epoxy resin hybrid basis with self-leveling properties.

The viscoplastic, flexibilized formulation combines high mechanical strength with chemical resistance.

EURODUR EPH 0402 CRACKFIT achieves very good adhesion to various substrates and is used for sealing cracks and small breakouts in concrete surfaces. Due to the flexibilization, the material cures with low stress.

EURODUR force fit is a thixotropic, solvent-free 2-component anchor adhesive based on vinyl ester resin for the highest loads in concrete and masonry. EURODUR force fit has European Technical Approval (ETA) for anchoring in cracked and non-cracked concrete. And a further European Technical Approval (ETA) for retrofitted reinforcement connections under seismic load.

EURODUR force fit offers a reliable solution, especially in airport construction, where substructures, crash barriers, supporting structures or technical installations have to withstand extreme forces. Thanks to its high load-bearing capacity, fast curing and resistance to water, fire and chemicals, it is ready for use even under the most difficult conditions.

The anchor adhesive can be used universally – from dry and wet concrete to flooded drill holes. Subsequent reinforcement connections in reinforced concrete can also be carried out safely and in accordance with standards. With special variants such as the Winter Edition (down to -20 °C) and the Tropical Edition (up to +50 °C), EURODUR force fit is suitable for almost any climate.