to Overview
Using different tape widths (25 – 250 mm), the joint tapes are especially suitable for renovation of under or over-sized joints with above average overall movement. The expensive removal of old, defective joint material may not be necessary, because the joint tape can easily be placed over the existing joint.
EUROTEK TK joint tape
2-component polysulphide joint tape
- EUROTEK TK joint tape
- EUROLASTIC TK 51
- EUROLASTIC Primer B1
- EUROTAPE
- Existing defective sealant
System description
EUROTEK TK joint tape is a weatherproof, industrially produced joint tape. The tape shape complies with DIN 18540. Adhesion is provided by EUROLASTIC TK 51 1-component polysulphide adhesive up to a tape width of 140 mm. EUROLASTIC TC 30 S 2-component polysulphide adhesive is used for tapes over 160 mm wide.Using different tape widths (25 – 250 mm), the joint tapes are especially suitable for renovation of under or over-sized joints with above average overall movement. The expensive removal of old, defective joint material may not be necessary, because the joint tape can easily be placed over the existing joint.
Areas of application
Suitable for creation or renovation of horizontal (floor) and vertical (wall) joints in building construction with above average overall movement and for joint renovation, e.g. for exterior wall joints between concrete and reinforced concrete precast components and for split joints in bridge building.System features
Long-term durability exceeding 30 years
Highly flexible
Easily repaired
Pre-assembled
High UV and weathering resistance
Above average movement absorption
Tape widths from 25 – 250 mm
Recyclable
Easy application
Visually perfect joint appearance
Outstanding cold resilience to -60°C
Complies with DIN EN 18540